Car computer diagnostics in Dubai at Mori Autoworks: we check the engine, transmission, brakes, ABS, AC, and electronics. We explain each fault in plain words before any repair is quoted. You only pay to fix what is wrong.

Engine, Brakes, AC, and Electronics Checked

Faults Explained Before Repair

Quote Only for Real Faults
Send the make, model, and the warning light or symptom on WhatsApp. We will tell you what the scan involves and the price.

















Discover the full range of computer diagnostic checks we offer at Mori Autoworks:
We scan the engine for fault codes linked to misfires, ignition timing, the fuel system, and faulty sensors. A code shows which area to test, not always the exact part.
We read transmission fault codes and sensor readings linked to delayed shifts, slipping gears, and hot transmission fluid. If the scan finds a fault, our transmission services team can repair it.
We read ABS fault codes and check the wheel speed sensors and the electronic parts of the braking system.
We check the oxygen sensors, the catalytic converter, and emission levels against the legal limits. You know about an emissions fault before the RTA test.
We read the supported electronic and safety control units, such as the airbags, traction control, and cruise control.
Our diagnostics track live data from airflow, pressure, temperature, and fuel sensors. This helps us look into faults that a stored code alone does not explain.
We read the AC sensors, refrigerant readings, and blower performance. A scan does not replace a full AC inspection, so we tell you if the AC needs one.
We test battery condition, alternator output, and the charging system for faults.
Is a warning light on, or does the car drive differently? Send us the make, the model, and what you have noticed on WhatsApp. We will book the scan.
The check engine, ABS, airbag, or transmission light means a control unit has stored a fault code. A car computer diagnosis reads that code and the data around it, so we know which system to look at.
Rough idle, hesitation, unusual gear changes, or electrical faults can leave codes before a light appears. A scan reads them.
Vehicle computer diagnostics show stored fault codes and whether codes were cleared recently. This adds to a used car inspection, but a scan alone does not show the overall condition of the car.
A fault code points to a system, not always to the exact part. Some problems, such as worn suspension bushes or a slow oil leak, never set a code at all. We tell you when the scan has not found the cause, and we check the car by hand as well.

We connect the diagnostic equipment to the car. Then we open each supported module, such as the engine, transmission, and ABS.

We read the stored codes, then watch the sensors while the engine runs. Live data shows why a fault is happening.

We go through the results with you in plain words. Any repair is quoted before work starts.
A plug-in code reader reads basic fault codes, often from the engine only, and can clear the warning light. What it can read depends on the make, the model, and the device.
Workshop equipment reads the supported control modules, shows live data, and runs system tests that a basic reader cannot. We use manufacturer-approved diagnostic software.
Come in if the light keeps coming back, if several systems show faults, or if the code does not explain the problem. Clearing a code at home does not fix the fault.
The price of a diagnostic check depends on:
Any repair is quoted separately, after you see the results. Send us the make, the model, and the symptoms on WhatsApp. We will tell you the price before you bring the car in. If you go ahead with the repair here, the diagnostic fee comes off the repair bill.
Fixing the engine, sensor, or transmission fault behind a problem can help the car run as it should. If the scan points to dirty injectors, fuel injector cleaning may help.
If a fault code does not explain the problem, we tell you, rather than replacing parts to find out.
We read the supported control units beyond the engine, such as the ABS module. That includes the airbag module.
You get the price of the check before you come in, and any repair is priced before work starts.
We use diagnostic computers and manufacturer-approved software, so the results match what the car’s own systems report.
You choose between genuine, used, or aftermarket parts, and we explain each option first.
The fault is found and repaired at the same Ras Al Khor workshop. The car is not passed between garages.
Book computer diagnostics at Mori Autoworks in three steps.

Tell us the make, the model, and which warning lights or symptoms you have noticed.

We are at Ras Al Khor Industrial Area 2, Shed No. 2, Dubai. The map link in the contact details shows the way.

We show you the codes, explain what they mean, and quote any repair before you decide.
Message us on WhatsApp or call +971 50 586 5860, and we will book your car in for a scan.
Read what our customers say about computer diagnostics at Mori Autoworks.
Mori Autoworks is a workshop, so you bring the car to us in Ras Al Khor. Customers come to us from across Dubai, including Business Bay, Downtown Dubai, Al Jaddaf, and Dubai Festival City.
Make an Appointment
Send the make, model, and what you have noticed on WhatsApp, or call us.
Contact Mori Autoworks
Find us
Request a Callback
We read the engine, transmission, ABS, AC, battery, and emissions systems your car supports. Then we explain each fault and quote any repair before work starts.
You can get car engine diagnostics at Mori Autoworks in Ras Al Khor Industrial Area 2. A fault code shows where to look, and some faults need more testing to find the exact part.
The cost of car computer diagnostics depends on the car and the systems tested. At Mori Autoworks, we tell you the price before we start. If a repair is needed, it is quoted separately.
Yes, Mori Autoworks repairs faults found by the scan in the same workshop that found them. Our team handles electronic faults, sensor replacements, and calibration.
We explain every fault in plain words before we suggest a repair. We use modern scanning equipment, including manufacturer-approved software, and the same team can carry out the repair.
For a first look, yes. A plug-in reader shows basic engine fault codes, but it may miss the transmission, ABS, and airbag modules. If the light comes back after you clear it, bring the car in. We will check the engine, transmission, brakes, and electronics.